Your needs, this model
Does it fit your priorities?
Can I set the Professional Precision Adjust Elite to 20° for a kitchen knife and finish with an included strop?
The product page gives a continuous 15°–30° range and lists a leather strop among ten abrasives, so 20° and an included strop are documented for this exact package. The page conflicts about whether compound is preloaded, and the appropriate angle still depends on the knife.
Explore this need in the finder →Does this exact Professional Elite package include a serration method and small-knife support?
Yes. Its box list includes a dedicated serration sharpener and small-knife table attachment; the Professional guide explains separate serration and small-blade procedures. Both operations are manual and require the user to position and control the blade.
Explore this need in the finder →Will this model meet an exact 31° angle requirement?
No. The manufacturer specifies a 15°–30° adjustment span. The 31° setting is outside that documented range, even though the kit includes a digital angle indicator and more abrasive choices than the standard Professional model.
Explore this need in the finder →The Work Sharp Professional Precision Adjust Elite (SKU WSBCHPAJ-PRO-ELT) combines the Professional series’ metal clamp-and-rod platform and digital angle indicator with a ten-surface abrasive set and a rugged carry case. It is a manual system: the user clamps the knife, sets the angle and controls every stroke. Work Sharp’s US page lists five conventional diamond grits, fine ceramic, three resin-bonded diamond plates and a leather strop, plus a dedicated serration sharpener and small-knife table. This is an evidence-based assessment rather than a use test. The exact manufacturer product page and its Professional Precision Adjust Elite guide are the primary sources.
What the Elite package adds to the Pro system
The included surfaces are unusually explicit on the product page: 220, 320, 400, 600 and 800 grit electroplated diamond, fine ceramic, resin-bonded 1200, 2000 and 3000 grit diamond, and a leather strop. Work Sharp identifies the abrasive handles as one inch by six inches and describes the resin-bonded plates as a finer finishing option. The kit also contains a digital angle indicator, metal V-block clamp, clamp stabilizer, small-knife table and dedicated serration sharpener, all arranged in a custom hard case. Its listed weight is 12 lb, so the case improves organization and transport but does not make this the lightest system to carry. The extra fine plates are the defining reason to consider this model over the standard Professional Precision Adjust. They provide a longer documented progression after the 800-grit diamond and ceramic stages, rather than a promise of a particular edge sharpness. Whether that extra sequence helps depends on the steel, edge condition, intended cut and technique. If routine maintenance is the goal, or if you do not plan to use resin-bonded finishing plates, the smaller Pro package already includes a broad conventional grit sequence, strop and the same major guide format.Guided control still takes practice
The metal frame and clamp hold the knife while a guided rod carries the selected abrasive across the edge. Work Sharp’s guide explains how to align and secure the V-block, set the angle with the digital indicator, select the abrasive, and sharpen with light strokes. It calls for zeroing the indicator on the same benchtop surface before reading the rod angle, then removing the indicator before the actual sharpening strokes. The manual recommends starting with coarser abrasives for repair or shaping and moving through finer surfaces as the edge condition warrants. For a small blade, the included table provides a distinct support arrangement; for serrations, the dedicated tool is used scallop by scallop. That much equipment creates options, not automation. A beginner still has to learn how to secure a knife, maintain a consistent stroke, raise and remove a burr, and stop before removing more material than necessary. The display helps repeat the guide setting, but it cannot determine the correct bevel for a specific knife. Work Sharp’s own material offers general angle examples; use the knife maker’s guidance where available and be conservative about changing an established edge.Fit, limits and package checks
Work Sharp states on this exact product page that the clamp accommodates blades up to ¼ inch thick and up to 15 inches long. The same page cautions that long blades may need to be sharpened in sections; only a portion of the abrasive contacts the edge at a time. Treat those dimensions as manufacturer limits for clamping, not a guarantee that every long or unusually shaped knife clears the handle and base. The system is listed for kitchen, hunting, pocket and serrated knives, but no exact scissor or tool use is established for this model. The resin-bonded strop details deserve one extra check. The product specification describes the included leather strop with 0.5-micron chromium oxide, while the page’s general FAQ says strops come plain and are not preloaded. Those statements conflict, so the included strop is verified but its compound condition is not. If a preloaded or uncoated strop matters to you, confirm the exact current package before buying rather than assuming the product page has reconciled the contradiction.Care and ownership
The manufacturer guide describes the Professional system as dry, says not to use oil, and permits small amounts of water on the abrasive. The product FAQ takes a broader cautionary tone about water and says to dry the tool quickly if water is introduced. Follow the exact guide packed with the unit and dry metal promptly. The ten included surfaces also create a replacement and storage task: keep the grits identified, use the manual’s light-pressure technique and check replacement compatibility before mixing handles or plates from different Precision Adjust generations. Shortlist the Professional Precision Adjust Elite if you want the metal platform, digital angle setting, serration and small-knife attachments, a full repair-to-finish abrasive range and a fitted case in one package. It is overbuilt for someone who needs only occasional touch-ups or a simple kitchen pull-through, and its 12-pound listed weight and many separate abrasives require dedicated storage. Confirm SKU WSBCHPAJ-PRO-ELT, the ten named surfaces, case and exact accessories on the seller’s offer; the similar Precision Adjust names cover materially different frames and contents.Key specifications
Key details at a glance
| Power | Manual |
|---|---|
| Sharpening format | V-block clamp and guided rod |
| Lowest angle setting | 15° |
| Highest angle setting | 30° |
| Included abrasive surfaces | 220-grit diamond / 320-grit diamond / 400-grit diamond / 600-grit diamond / 800-grit diamond / fine ceramic surface / 1200-grit resin-bonded diamond / 2000-grit resin-bonded diamond / 3000-grit resin-bonded diamond / leather strop |
| Benchtop base included | Yes |
| Strop included | Yes |
| Use dry (no oil or water) | No |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
Check the requirements that matter to you
Use the finder to compare documented sharpener formats and limits; an unknown capability is not treated as a match.